When purchasing a Self Contained compactor for your wet waste, the most important thing it must NOT DO is leak. All of our Self Contained compactors use a triple hinged, full seal rear door. To ensure the tightest seal possible, we have engineered an exclusive side and BOTTOM latching system. Through out the life of our compactors, the rear door will not bow outward from extreme pressures allowing fluid to leak.

<Click here for large view with diagrams>
Specifications spacer spacer spacer
Overall Length 17'-5"

STANDARD FEATURES

  • PLC Controlled Power Unit
  • Exclusive Side & Bottom Door Latch System
  • Double End Pick-up (standard with outside rail cable pull)
  • E-Stop Button / Auto Single Cycle
  • Key Lock On/Off Switch
  • Low Oil Sensor Shutdown
  • Multi Cycle Timer
  • 80%-100% Full Lights
  • Auto Shutdown with Auto Safety Retract
  • 15' Remote
  • Fluid Level and Temp Gauge
  • Fluid Filled Pressure Gauge
  • Fluid Inlet Strainer
  • 15' Hydraulic Hoses
  • This Equipment Conforms to all Current ANSI Z 245.2 and OSHA Safety Standards
Overall Width 101"
Overall Height 94"
Compactor Capacity 2 Cu. Yds.
Container Capacity 15 Cu. Yds. (60 Cu. Yds. Loose)
Platen Area 60" x 44" x 36"
Charge Opening 42" x 60"
Ram Penetration 12"
Twin Bypass Cylinders 4" Bore x 42" Stroke x 2.5" Rod
Line Pressure 2000 PSI
Max Line Pressure 2500 PSI
Max Ram Force 63,000 Lbs.
Cycle Time 45 Sec.
Fluid Capacity 35 Gal.
Pump 10.5 GPM
Motor 10HP - Tri-Volt, 3 Phase
Loading Height 53"
Approximate Weight 9,500 Lbs.
Structural Features
.5" Steel Plate Floor with 3" Structural Steel Channels, .25" Steel Plate Sides with 4" x 2" x .25" and 6" x 2" x .25 " Structural Steel Tubing with 6" channel.
Breaker Bar 6" x 6" x 1" with Retaining Teeth
6" x 6" x .5" Hydraulic Cylinder Mounts
Replaceable .5" UHMW Polyethylene Wear Bars on Ram Sides, Top and Bottoms of Platen for a Smooth, Quiet and Near Frictionless Operation
Weatherproof Control Panel and Power Pack
Removable Rear Access Panel
6" Fluid Sump with Left & Right Side 4" Drains
© Copyright 2009, Pacific Compactor Corporation, All Rights Reserved.